Products - ATIS XMU+ Specifications

ATIS XMU+

Automatic Terminal Information System

Product Specifications

Audio Inputs:

• Tape: 10K ohms (1/4"phone jack)
• Remote access jack (RJ11 for PSTN or PBX connection)

Audio Storage:

•  Voice encoding/decoding
•  Pulse code modulation (PCM)
•  Storage medium: SDRAM and FLASH
•  Storage rate: 8 kHz x 8 bit bytes/sec (64K digital bandwidth)
•  Frequency response: 300 Hz to 3.4 kHz (+/- 3 dB)
•  From 8 minutes to 6 hours of recording time

Alarm Contacts:

• 2 output contacts (universal)
• 2 inputs (12-60v voltage sensing contact closure)

Communication Ports:

•  2 RS-232 port (RJ-45)
•  1 Ethernet port (RJ45)
•  1 V9.2 Modem port (RJ11)

Programming Options:

• Via front panel
• Via XMUCOM+ Software

Messages:

•  999 messages per partition
•  64 partitions
•  Messages cannot exceed total recording time

Message Transmission:

• Outgoing message plays continuously to transmitter output

Audio Storage/Reproduction:

• Audio messages can be recorded remotely,
or via an optional ring-down circuit

Signal To Noise Ratio:

• 50 dB at 1 KHz

XMU+ Large Power Supply:

• 110/240 VAC, 1.0/0.5 A, 60/50 Hz, 120 W
• -48 VDC, 2.5 A, 120 W

XMU+ Small Power Supply:

• 110/240 VAC, 0.4/0.2 A, 60/50 Hz, 40 W

Approvals:

• FCC, CS-03, NRTL/C, CE, cCSAus

XMU+ Large Dimensions:

• 7 in. (17.5 cm) Height x 17.5 in. (44 cm) Width x 12 in. (31 cm) Depth

XMU+ Small Dimensions:

• 1.75 in. (4.38 cm) Height x 17.5 in. (44 cm) Width x 12 in. (31 cm) Depth

Temperature Range:

• Storage: 0 to +60 degrees C
• Operating: +10 to +40 degrees C

Relative Humidity:

• Storage: 10% to 90%
• Operating: 10% to 90%

Message Administration:

•  Option 1: Via handset directly from the control tower
•  Option 2: Remote-ring down directly to the ATIS
•  Option 3: Remote access over the telephone
•  Option 4: Air/ground voice switch integration
•  Option 5: TCP/IP

ATIS (XMU+) Line Card:

•  Option 1: Four balanced 600 ohm outputs as
    transmitter or monitor outputs
•  Option 2: Four balanced 600 ohm outputs as
    transmitter or monitor outputs plus four PSTN (Telephone) lines

Keying The Transmitters:

• Phantom PTT (Voltage Keying) internal or external power options
• A dry contact closure is used to enable/disable each transmitter port.

Available Contact Options:

• Normally Open
• Normally Closed

Transmitter Outputs:

•  Up to 4 balanced 600 ohm outputs
•  Unique message plays to each output
•  Output Level: -10 dBm to +2 dBm at 600 ohm

Monitor Outputs:

• Up to 2 balanced 600 ohm outputs to monitor a transmitter output
• Output Level: -10 dBm to +2 dBm at 600 ohm

XMUCOM+ Administration Software:

•  Windows 98, 2000 or XP
•  Support for .wav files
•  Remotely manage 1000 XMU+ units or more
•  Download configurations via windows

Note: Specifications are approximate and are subject to change.

Product Photos

Related Links

Customers

Brochures