left image
right image

Customer Profiles

American Mechanical

American Mechanical Services uses the Alarm Monitor to monitor mechanical equipment in their many buildings. E8.5 EA4

Related Links

Alarm Dialer Main
Alarm Dialer Overview
Alarm Dialer Features
All Products

Customers

Profiles
Comments

Brochures

Alarm Dialer Application EA4
Alarm Dialer Product E8.5
All Brochures

Products - Alarm Dialer Specifications

Alarm Dialer

Remote Asset Monitoring Device

    

Product Specifications
 

Models:

• 8 alarm contacts with 12 VDC rated contacts
• 8 alarm contacts with 12 VDC rated contacts and 2-way radio feature
• 8 alarm contacts with 24 VDC rated contacts
• 8 alarm contacts with 24 VDC rated contacts and 2-way radio feature

* Models are also available for 48 or 130 VDC contacts

Messages:

• Stores up to 10 customized pre-recorded messages in non-volatile FLASH memory  (1 site ID message, 8 alarm messages and 1 low input voltage message)
• Local or remote message recording using phone, cellular, satellite or two-way radio
• Holds messages from 2-25 seconds each
• Up to 90 seconds of message storage

Input/Output:

• One RJ21X 50 pin connector:
• Normally open/closed and normally common connections for contacts
• 12-24 VDC input voltage
• 3 auxiliary control outputs
• 2-way radio interface
• One RJ11C analog telephone interface (2500 set)
• One RJ11C telephone line interface

Alarm Contacts:

• Eight alarm inputs to monitor normally open/normally closed contacts
• Inputs can be factory configured for one of the following:

  1. 12 VDC (Internal voltage source via 12 VDC power)
  2.  24 VDC (External voltage sources)
  3. 48 VDC (External voltage sources)
  4. 130 VDC (External voltage sources)
  5. 1 internal configurable low input power alarm


Dimensions:

• 4.5 cm (1.75") H x 20.5 cm (8") W x 20.5 cm (8") D

Auto Dialings:

• Dials up to twenty-four 14 digit numbers (DTMF or DP)
• Up to 9 different directories
• Loop start or ground start input power alarm

Power:

• 12 - 24 VDC

Weight:

• .75 kgs (1.6 lbs)

Approvals:

• FCC, CS-03, NRTL/C

Optional Accessories:

• 120 VAC power adapter
• 50 pin amphenol cable terminated at one end (10 ft.)
• 50 pin amphenol cable terminated at both ends (10 ft.)
• Wall mount sleeve

Specifications are approximate and are subject to change.

Alarm Dialer Main
Alarm Dialer Overview
Alarm Dialer Features