Announcement systems since 1975 · Canada & United States
Downloads
INTERALIA Audio Systems
ATISSBX2SBX3XMU+iProMOH-V5SAMiMCMSupportAboutContact
Contact us
Products / ATIS
Automatic Terminal Information Service

ATIS broadcast systems
for commercial and military airfields

Interalia ATIS transmits repetitive information — wind, visibility, temperature, active runway and field conditions — to inbound and outbound aircraft on a continuous 24-hour cycle, so the tower does not have to read it out to every arrival.

Request a quote Comparison sheet (PDF)
How it works Compare platforms Where it is used Documents
How it works

Four steps, repeating around the clock.

01

Record the cycle

From the front-panel handset, over the phone, or by uploading prepared audio from the admin software.

02

Publish without a gap

The new cycle replaces the old one at the boundary. The channel never goes quiet while you record.

03

Broadcast on every port

Feed the transmitter, a dial-in information line and a second-language channel from the same chassis.

04

Survive the outage

Messages and configuration are retained through a loss of power and come straight back on restore.

Compare platforms

Which ATIS belongs in your rack?

All three are the same product family doing the same job. The difference is how much you need to scale, and how modern the interface and network stack have to be.

Legacy

XMU+ ATIS

While stock lasts · fully supported
Shipping now

SBX2 ATIS

Recommended for new installs
In development

SBX3 ATIS

Target specs — subject to change
Capacity
Expandable — hybrid, T1 and MOH line cards
8 configurable multi-function ports
[PORT COUNT TBD]
Telephony
Analog · T1
Analog (RJ-45) · remote phone port (RJ-11)
Native SIP / VoIP alongside analog
Audio storage
See XMU+ specification sheet
60 minutes · up to 999 messages
[CAPACITY TBD]
Audio format
.wav · CCITT µ-Law
.wav mono · 8-bit CCITT µ-Law · 8 kHz
[FORMAT TBD]
Administration
XMUCOM+ Windows client · front panel
XMUCOM+ Windows client · front panel · remote phone
Browser-based web UI — no Windows client
Chassis
Rack mount, card cage
1U · 1.75" H × 17.5" W × 9.25" D
[CHASSIS TBD]
Power
See specification sheet
110/240 VAC · 20 W · 50/60 Hz
[POWER TBD]
Certification
FCC · CE · CSA/US · CS-03
FCC · CS-03 · CSA/US · CE · A-Tick
Targeting equivalent certification
Current firmware
v6.86.19
v1.38.13
—
Where it is used

What an ATIS is actually for.

Human error, removed

The conditions broadcast is recorded once and repeats exactly. No transcription drift between the tower and the cockpit, and no reading the same numbers out forty times an hour.

Controller workload, reduced

Routine information moves off the frequency, so the channel is spent on the traffic that genuinely needs a human on the other end.

Multiple languages, multiple channels

Run simultaneous broadcasts on separate channels from one chassis where bilingual service is required — no second box, no second recording workflow.

Never off the air

Record the next cycle while the current one plays, and keep every message and setting through a power outage.

Documents

Manuals and specifications, no login required.

ATIS SBX2 brochurePDF
ATIS XMU+ brochurePDF
SBX2 vs XMU+ comparison sheetPDF
XMU+ ATIS user manualPDF
SBX2 user manualPDF
XMUCOM+ and firmwareDownloads

Not sure which platform fits the field?

Tell us your port count, languages and network, and we will tell you honestly which of the three to buy — including when the answer is the older one.

Talk to an engineer Find a reseller
INTERALIA

Announcement and messaging hardware, designed and built in Canada since 1975.

ATIS XMU+ ATISSBX2 ATISSBX3 previewComparison sheet
Products iProMOHiMCMSimple Audio MixerDiscontinued
Support ManualsFirmwareXMUCOM+Open a ticket
Contact 7922 Okanagan Landing Rd, Suite 601
Vernon, BC V1H 2K5
4786 1st Ave South, Suite 102
Seattle, WA 98134
1-800-661-9406
© 2026 Interalia Inc. Privacy · Terms & Conditions · Software EULA · Music licensing notice